Airtel Ghana Internet Settings for All Devices – Manual & Automatic Configuration | Overview of Airtel Ghana Internet Settings Procedures for any internet enabled device.
If your device is not automatically configured when you insert your activated Airtel simcard due to one reason or the other, the solution is to manually configure your device to browse the internet with airtel ghana.
Below is the procedure to manually configure your device for internet with Airtel. The following devices Internet Settings are available here:
- Airtel Ghana Internet Settings for Andriod Devices
- Airtel Ghana Internet Settings for iPhone and Ipad
- Airtel Ghana Internet Settings for Tablet
- Airtel Ghana Internet Settings for Nokia Phones
- Airtel Ghana Internet Settings for Sony Ericsson
- Airtel Ghana Internet Settings for Samsung
- Airtel Ghana Internet Settings for Motorola
- Airtel Ghana Internet Settings for LG
- Airtel Ghana Internet Settings for Alcatel
- Airtel Ghana Internet Settings for Chinese Phones
See also:
Getting Started – Provisioning the AirtelSim for internet or wap
- Send ‘internet’ or ‘wap’ to 232.
Install or save received settings and use as default. - Insert the AirtelSim into an Airtel modem, connect and browse on it for some few minutes.
- Call customer care ‘121’ and request for sim provisioning.
Airtel Internet Settings for Android Operating Systems
- Go to settings >More settings>Wireless and Mobile networks >Access Point Names>Set new APN.
- Enter ‘Airtel’at name.
- Enter ‘internet’ at where you see ‘APN’
- Save your new APN by checking the newly created.
NB: when setup is successful there will be an ‘H’ ‘3G’ or the bars of your network.
Airtel Internet Settings for IPhones
Internet connection Setup
Go to Menu→ Settings→ General→ Network
APN: internet
Ignore Username & Password
Save
Launch Browser
IPAD
Go to settings > General > Cellular data > Enter ‘internet’ at APN> Save and Launch Browser.
AIRTEL INTERNET SETTINGS – TABLETS
Go to settings > More settings>Wireless and Mobile networks>Access Point Names> Create New APN
- Enter ‘Airtel’at name.
- Enter ‘internet’ at where you see ‘APN’
- Save your new APN by checking the newly created.
NB: when setup is successful there will be an ‘H’ ‘3G’ or ‘E’ with one up and one down arrow on the bars of your network
- Or touch the network symbol on your tablet to open the network settings
Go to more settings, mobile network data and create APN.
- Save your new APN by checking the newly created.
NB: when setup is successful there will be an ‘H’ ‘3G’ or ‘E’ with one up and one down arrow on the bars of your network
AIRTEL INTERNET SETTINGS – NOKIA
WAP SETTINGS
1. Go to Menu> Tools >Settings >Connection> Access points> Options
New Access point >Use default setting. Enter details for the following parameters.
- Connection name: Airtelwap
- Data Bearer: Pocket data
- Access point name: wap
- User name: <none>
- Password: <none>
- Authentication: Normal
- Homepage: http://www.gh.airtellive.com
Go to Options then select Advance settings. Enter details for the following parameters:
Network type: Ipv4
Proxy serv. address: 10.93.85.88
Proxy Port number: 9201
2. Go back to the main menu, select Web, press Options then Settings.
Choose Airtelwap as the default access point.
NOKIA INTERNET SETTINGS
Go to Menu Tools Settings Connection Access points Options New Access point
Use default setting. Enter details for the following parameters
- Connection name: Airtel Internet
- Data Bearer: Packet data
- Access point name: internet
- User name: <none>
- Password: <none>
- Authentication: Normal
- Homepage: http://google.com
2. Go back to the main menu, select Web, press Options then Settings.
Choose Airtel Internet as the default access point.
SONY ERICSSON
WAP SETTINGS
- Go to Menu>Choose Settings>Connectivity
- Go to Data Accounts
- Create New Account. GPRS/ PS Data
- Account Name: AirtelWap
- APN: Wap
- Save Account
- Go to Internet Settings
- Create New Profile
- Name: Airtel WAP
- Connect Using: AirtelWap
- Save Profile
- Select the profile Airtel WAP in Internet Profile
- Click Right Soft Key to Choose More and Select Settings
- Internet Mode: HTTP
- Use Proxy: Yes
- Proxy Address: 10.93.85.88
- Port Number: 9401
- Save Settings and repeat Step 9 but this time choose Advance Settings
- Change Homepage
- Title: Airtel
- Address: http:/www.gh.airtellive.com
- Save Changes
SONY ERICCSON INTERNET SETTINGS.
- Go to Menu>Choose Settings>Connectivity
- Go to Data Accounts
- Create New Account. GPRS/ PS Data
- Account Name: Airtel Internet
- APN: Internet
- Save Account
- Go to Internet Settings
- Create New Profile
- Name: Airtel
- Connect Using: Airtel Internet
- Save Profile
- Select the profile Airtel Internet in Internet Profile
- Click Right Soft Key to Choose More and Select Settings
- Save Settings and repeat Step 9 but this time choose Advance Settings
- Change Homepage
- Title: Airtel
- Address: http://google.com
- Save Changes
SAMSUNG
Go to Menu Browser Profile Settings (select any Profile Info)
Enter details for the following parameters:
Profile Name: AirtelWap
- Home URL: http://www.airtellive.com
- Bearer: GPRS only
- Proxy: Enable
- GPRS Settings
- IP Address: 10.93.85.88
- Port: 80
- APN: wap
- Login ID: <blank>
- Password: <blank>
2. To activate WAP over GPRS go to Home.
SAMSUNG WAP SETTINGS
- Go to Menu> Tools >Settings >Connection> Access points> Options
- New Access point >Use default setting. Enter details for the following parameters.
- Connection name: Airtelwap
- Data Bearer: Pocket data
- Access point name: wap
- User name: <none>
- Password: <none>
- Authentication: Normal
- Homepage: http://www.gh.airtellive.com
Press Options then select Advance settings. Enter details for the following parameters:
- Network type: Ipv4
- Proxy serv. address: 10.93.85.88
- Proxy Port number: 9201
2. Go back to the main menu, select Web, press Options then Settings.
Choose Airtelwap as the default access point.
SAMSUNG INTERNET SETTINGS
Go to Menu Tools Settings Connection Access points Options New Access point
Use default setting. Enter the following parameters
- Connection name: Airtel Internet
- Data Bearer: Packet data
- Access point name: internet
- User name: <none>
- Password: <none>
- Authentication: Normal
- Homepage: http://google.com
2. Go back to the main menu, select Web, press Options then Settings.
Choose Airtel Internet as the default access point.
MOTOROLA
WAP SETTINGS
1. Go to Menu WebAccess Web Sessions [New Entry].
Enter details for the following parameters.
- Name: AirtelWap
- Homepage: http://www.gh.airtellive.com
- Service Type 1: WAP
- Gateway IP 1: 010.093.085.088
- Port 1: 9201
- Line type 1: ISDN
2. Select AirtelWap, press then select Set Default.
Life is Good (LG)
WAP SETTINGS
1. Go to Phone Menu>Settings>Network
2. Go to Access Points
3. Create New Access Point. Enter the following in the field.
- Connection Title: AirtelWap
- Bearer: GPRS
- Authentication: No auth
- APN: Wap
4. Save Account. Go to Phone Menu, select browser>Settings> Profile
5. Add new Profile. Enter the following in the field.
- Service Name: AirtelWap
- Homepage: http:// www.gh.airtellive.com
- Connection Mode: TCP with Proxy
- IP Address: 10.93.85.88
- Proxy Server Port: 9401
6. Set Access Point to AirtelWap.
7. Save Profile
LG INTERNET SETTINGS.
1. Go to Phone Menu>Settings>Network
2. Go to Access Points
3. Create New Access Point. Enter the following in the field.
- Connection Title: Airtel Internet
- Bearer: GPRS
- Authentication: No auth
- APN: internet
4. Save Account. Go to Phone Menu, select browser>Settings> Profile
5. Add new Profile. Enter the following in the field.
- Service Name: Airtel Internet
- Homepage http://google.com
- Connection Mode: TCP without Proxy
- IP Address: DISABLE
- Proxy Server Port: DISABLE
6. Set Access Point to Airtel Internet.
7. Save Profile
ALCATEL
1. Select WAP from the Menu options. Select Profiles then press the OK button.
2. Select Options then Create. Enter details for the following parameters:
- Profile name: AirtelWap
- Homepage: http://www.gh.airtellive.com
- IP address: 010.093.085.088
- Security: Normal
- Bearer choice: GPRS
- Bearer name: AirtelWap
- Authentication: None
- APN: Wap
Select Confirm to save bearer settings.
Select Confirm to save profile settings.
3. To activate WAP over GPRS, select AirtelWap. Press the OK button then select Activate.
4. To initiate WAP over GPRS, select WAP then Homepage.
CHINESE PHONES
CHINA PHONE SETTINGS
- Select “Entertainment”
- Select “Service”
- Select “Data Account”
- Select GPRS data
- Select “Select a Profile”
- Select “Edit Profile”
- Name: AirtelWap
- APN: wap
- User name: none
- Password: none
- Authentication: Normal
Save Account
STEP 2
- Select “Entertainment”
- Select “Service”
- Select “WAP” then select “Setting”
- Select “Edit Profile”
- Select any of the profile
- Select “Edit Profile”
GPRS Setting :
1. Rename Profile :AirtelWap
2. Homepage Setting: http://www.gh.airtellive.com
3. Data Account: Airtelwap
4. Select “Connection Type” then select “HTTP” then select “OK”
-
-
- Proxy Address : 010.093.085.088
- Proxy Port : 9401
-
5. User name:
6. Password:
Step 8: Save& activate the profile
Launch browser.